Installation & maintenance
Installer votre osmoseur simplement, avec ou sans professionnel
Before ordering, check the prerequisites, choose your faucet, then select the installation method best suited to your situation.
Before choosing your installation
The 4 elements to consider
A few simple points can confirm that installation is possible and help you choose the most suitable configuration for your kitchen.
1. An under-sink space
Your reverse osmosis system is installed in the cabinet under the sink (or nearby). You need to allow enough space for the appliance and access to the filters.
2. An accessible water supply
The reverse osmosis system connects to your cold water supply, usually under the sink.
3. An electrical outlet
The RO unit requires an electrical power supply. Directly under the sink or a nearby electrical outlet is sufficient.
4. Choosing your tap
Single-dispense tap included or 3-way tap to replace your current tap: this choice is made during configuration.
Guided setup - Included with your order
Remote Guided Setup
The installation is designed to remain accessible, with clear support and remote assistance if you need it.
▶️ Find all our videos on our YouTube channel
1. You receive your RO system
Your order is prepared with all the necessary components for installation.
2. You follow the provided resources
A detailed guide, tutorial videos, and clear instructions accompany you step-by-step.
3. You can get support
Should you have any questions, Aquacycle can guide you remotely to help you finalize the installation.
How much time should you allow?
The time depends on your setup and your familiarity with this type of installation. The resources are designed to guide you simply, step by step. Allow approximately 2 to 4 hours.
Professional installation - from €175.21
Entrust the installation to a professional
Aquacycle verifies the feasibility of the installation before the intervention, then arranges the home installation with a professional. If installation is ultimately not possible, you will be refunded.
1. Order your reverse osmosis system
You choose your model, your faucet, and the professional installation option.
2. Feasibility is confirmed
Aquacycle checks that the installation can be carried out under good conditions.
Aquacycle will send you instructions for taking photos. These will help verify the feasibility of the installation.
3. An appointment is scheduled
A professional comes to your home to install your reverse osmosis system.
How long does it take?
The appointment is scheduled after the photos have been validated. The duration of the intervention depends on your on-site configuration.
Annual appraisal
Simple maintenance, once a year
Each reverse osmosis system comes with a set of filters for the first 12 months.
Consumable replacement is designed to be simple, quick, and self-service. An LED indicator tells you when the filters need to be replaced.
You can carry out the maintenance yourself, with no technical experience, in less than 2 minutes/year. The maintenance kit is offered to you when configuring your reverse osmosis system. Clear instructions will be sent to you with your kit, and Aquacycle remains available to assist you remotely.
In practice
Maintain your reverse osmosis system in 4 steps
Replace your filters independently at the right time, with the correct references and clear instructions.
1. You are notified in a timely manner
LED indicators on your RO system will signal when maintenance is due. Aquacycle will also send you a reminder email.
2. Order your maintenance kit
The kit is designed to provide you with all the necessary filters, membranes, and cartridges.
3. You will receive the instructions
Your kit comes with clear instructions for replacing the relevant components.
4. You simply replace your filters
No technical experience is necessary for routine maintenance.
Aquacycle Kits
Everything you need to maintain your reverse osmosis system
Aquacycle maintenance kits are designed to provide you with the correct filters, membranes, and cartridges for your model. They simplify maintenance, prevent referencing errors, and allow you to save money in the long term.
3 Benefits
Compatible with your model
Each kit corresponds to a specific reverse osmosis system.
Everything included
You receive the consumables necessary for proper maintenance of your system.
More economical over time
The kit groups useful replacements and allows you to anticipate maintenance.
Need help?
Need personalized support?
Our team answers your questions and helps you choose the solution best suited to your installation.
Your Questions
Installation FAQ
Is the installation complicated?
No. Most of our customers install their reverse osmosis system with no prior experience. Each reverse osmosis system comes with comprehensive instructions and remote support included. Basic DIY skills are sufficient.
Can I install it myself?
Yes. Guided installation is included in your order. You will receive comprehensive instructions and can benefit from remote assistance if needed.
Why send photos before professional installation?
They make it possible to check the available space, water supply, electrical outlet if necessary, and the type of faucet before scheduling the intervention.
What happens if installation isn't possible?
If professional installation is ultimately not feasible, you will be refunded.
What kind of interview should we plan?
Annual replacement of the filter cartridges is sufficient. Aquacycle maintenance kits are available to simplify this step. Expect to pay around €130/year for the NANO and around €100/year for the SMART and FLOW.
Can I buy replacement filters only?
Yes, if you know exactly which references correspond to your RO unit. However, kits remain the simplest solution: they include the consumables suitable for your model and reduce the risk of error. If in doubt, contact Aquacycle before ordering.
Can I use a professional?
Yes. Professional home installation is available. Please contact us for terms and conditions.
Ready to get equipped?
Set up your reverse osmosis system with ease. Choose your model, faucet, installation mode, and maintenance options.
